Wolverine’s 50th Anniversary Pops!

[Jezter]

Finally another Sabertooth and he’s not a bobble head.

Legit excited for this one!

Same here and I was quite surprised TBH

I must have missed something, what do you mean it's not a bobblehead? I don't recall seeing that confirmed anywhere...but maybe I missed it.

[DrunkoPop]

Legit excited for this one!

Same here and I was quite surprised TBH

I must have missed something, what do you mean it's not a bobblehead? I don't recall seeing that confirmed anywhere...but maybe I missed it.

You can clearly see it’s NOT a Bobble Head.

[Jezter]

Same here and I was quite surprised TBH

I must have missed something, what do you mean it's not a bobblehead? I don't recall seeing that confirmed anywhere...but maybe I missed it.

You can clearly see it’s NOT a Bobble Head.

Hmmm, pretty sure just about every and all Marvel pops are bobbles, even little tiny pocket pops. I don't think we can trust that image as proof it's not a bobblehead. I would be pretty surprised it wasn't.

[DrunkoPop]

I must have missed something, what do you mean it's not a bobblehead? I don't recall seeing that confirmed anywhere...but maybe I missed it.

You can clearly see it’s NOT a Bobble Head.

Hmmm, pretty sure just about every and all Marvel pops are bobbles, even little tiny pocket pops. I don't think we can trust that image as proof it's not a bobblehead. I would be pretty surprised it wasn't.

There’s plenty of images but I see your point.

[Jezter]

You can clearly see it’s NOT a Bobble Head.

Hmmm, pretty sure just about every and all Marvel pops are bobbles, even little tiny pocket pops. I don't think we can trust that image as proof it's not a bobblehead. I would be pretty surprised it wasn't.

There’s plenty of images but I see your point.

The Funko shop says they are "vinyl bobbleheads" so I'm going to assume he is, even if he doesn't look like it in the pic.

I do wish the Marvel pops were never bobbleheads though, makes some of the skinny ones fall over if they are even slightly off balance, kind of a bummer.

[Mayo]

I wonder if they'll do any new sets now that 97 is out

97 is on my backlog so I'm sure I'll be clamoring for that when I finally finish it!

I think they absolutely should with the popularity of 97.

They'd be fools not to. I believe Marvel Snap already added skins/art for 97.

[Grogu]

97 is on my backlog so I'm sure I'll be clamoring for that when I finally finish it!

I think they absolutely should with the popularity of 97.

They'd be fools not to. I believe Marvel Snap already added skins/art for 97.

Well if that's the case then this needs to happen. I hope 97 brings on a resurgence of some 90's cartoons.

[Mario Wario]

I think they absolutely should with the popularity of 97.

They'd be fools not to. I believe Marvel Snap already added skins/art for 97.

Well if that's the case then this needs to happen. I hope 97 brings on a resurgence of some 90's cartoons.

Hopefully!

[BikerGeek]

I think they absolutely should with the popularity of 97.

They'd be fools not to. I believe Marvel Snap already added skins/art for 97.

Well if that's the case then this needs to happen. I hope 97 brings on a resurgence of some 90's cartoons.

Some Spider-Man and his Amazing Friends leading to new Pops of those...*that'd* be cool!

[DrunkoPop]

Hmmm, pretty sure just about every and all Marvel pops are bobbles, even little tiny pocket pops. I don't think we can trust that image as proof it's not a bobblehead. I would be pretty surprised it wasn't.

There’s plenty of images but I see your point.

The Funko shop says they are "vinyl bobbleheads" so I'm going to assume he is, even if he doesn't look like it in the pic.

I do wish the Marvel pops were never bobbleheads though, makes some of the skinny ones fall over if they are even slightly off balance, kind of a bummer.

I totally agree with you there.

[Grogu]

There’s plenty of images but I see your point.

The Funko shop says they are "vinyl bobbleheads" so I'm going to assume he is, even if he doesn't look like it in the pic.

I do wish the Marvel pops were never bobbleheads though, makes some of the skinny ones fall over if they are even slightly off balance, kind of a bummer.

I totally agree with you there.

That must have been one of those oversights that tends to happen and it's disappointing to hear that they do that. What would you say the percentage is of those that fall over due to design?

[binarykaos]

That one w/the adamantium being ripped out...make that w/a Magneto 2pack...dang

This^^^^^^^

I second this as well!

[Cchavez77]

That one w/the adamantium being ripped out...make that w/a Magneto 2pack...dang

This^^^^^^^

I second this as well!

Yess!!!!! Need this!!

[BikerGeek]

This^^^^^^^

I second this as well!

Yess!!!!! Need this!!

Mebbe Funko'll pay attention to here and do it

[jibcollect]

I second this as well!

Yess!!!!! Need this!!

Mebbe Funko'll pay attention to here and do it

You never know!

[Jezter]

The Funko shop says they are "vinyl bobbleheads" so I'm going to assume he is, even if he doesn't look like it in the pic.

I do wish the Marvel pops were never bobbleheads though, makes some of the skinny ones fall over if they are even slightly off balance, kind of a bummer.

I totally agree with you there.

That must have been one of those oversights that tends to happen and it's disappointing to hear that they do that. What would you say the percentage is of those that fall over due to design?

Not sure I could calculate percentages, but I do have quite a few Marvel females with the skinny bodies and/or skinny ankles/feet that end up leaning because of their big heads. I'm guessing the center of gravity with the heads on a spring aren't quite right so they end up leaning and falling. Not only the females though, a lot of the dudes with big heads or big hair too, .

Unfortunately, as an OOB displayer, I do have to say I have a lot of non bobblehead pops that have leaned and fallen over, even after warming the legs and setting them straight again. Even without the spring some of them just naturally lean a bit, just enough for the center of gravity to go forward or back and over they go after a day or two of fixing. Nature of the beast if you want to display OOB, but sadly some of my displays have various characters laying down.

[DrunkoPop]

The Funko shop says they are "vinyl bobbleheads" so I'm going to assume he is, even if he doesn't look like it in the pic.

I do wish the Marvel pops were never bobbleheads though, makes some of the skinny ones fall over if they are even slightly off balance, kind of a bummer.

I totally agree with you there.

That must have been one of those oversights that tends to happen and it's disappointing to hear that they do that. What would you say the percentage is of those that fall over due to design?

40%

[DrunkoPop]

I totally agree with you there.

That must have been one of those oversights that tends to happen and it's disappointing to hear that they do that. What would you say the percentage is of those that fall over due to design?

Not sure I could calculate percentages, but I do have quite a few Marvel females with the skinny bodies and/or skinny ankles/feet that end up leaning because of their big heads. I'm guessing the center of gravity with the heads on a spring aren't quite right so they end up leaning and falling. Not only the females though, a lot of the dudes with big heads or big hair too, .

Unfortunately, as an OOB displayer, I do have to say I have a lot of non bobblehead pops that have leaned and fallen over, even after warming the legs and setting them straight again. Even without the spring some of them just naturally lean a bit, just enough for the center of gravity to go forward or back and over they go after a day or two of fixing. Nature of the beast if you want to display OOB, but sadly some of my displays have various characters laying down.

I’m a OOB displayer myself. I never have an issue.

[ItsJuhtin]

movie got be fuego

[Grogu]

I totally agree with you there.

That must have been one of those oversights that tends to happen and it's disappointing to hear that they do that. What would you say the percentage is of those that fall over due to design?

Not sure I could calculate percentages, but I do have quite a few Marvel females with the skinny bodies and/or skinny ankles/feet that end up leaning because of their big heads. I'm guessing the center of gravity with the heads on a spring aren't quite right so they end up leaning and falling. Not only the females though, a lot of the dudes with big heads or big hair too, .

Unfortunately, as an OOB displayer, I do have to say I have a lot of non bobblehead pops that have leaned and fallen over, even after warming the legs and setting them straight again. Even without the spring some of them just naturally lean a bit, just enough for the center of gravity to go forward or back and over they go after a day or two of fixing. Nature of the beast if you want to display OOB, but sadly some of my displays have various characters laying down.

I know of some OOB displayers that use a bit of modeling clay on the bottom of the feet, but that really depends on if you are displaying on top of the box like some people do.

[Jezter]

That must have been one of those oversights that tends to happen and it's disappointing to hear that they do that. What would you say the percentage is of those that fall over due to design?

Not sure I could calculate percentages, but I do have quite a few Marvel females with the skinny bodies and/or skinny ankles/feet that end up leaning because of their big heads. I'm guessing the center of gravity with the heads on a spring aren't quite right so they end up leaning and falling. Not only the females though, a lot of the dudes with big heads or big hair too, .

Unfortunately, as an OOB displayer, I do have to say I have a lot of non bobblehead pops that have leaned and fallen over, even after warming the legs and setting them straight again. Even without the spring some of them just naturally lean a bit, just enough for the center of gravity to go forward or back and over they go after a day or two of fixing. Nature of the beast if you want to display OOB, but sadly some of my displays have various characters laying down.

I know of some OOB displayers that use a bit of modeling clay on the bottom of the feet, but that really depends on if you are displaying on top of the box like some people do.

I've used quake putty and other means to keep the pops in place, unfortunately that doesn't do anything to stop them from leaning over.

[BikerGeek]

Not sure I could calculate percentages, but I do have quite a few Marvel females with the skinny bodies and/or skinny ankles/feet that end up leaning because of their big heads. I'm guessing the center of gravity with the heads on a spring aren't quite right so they end up leaning and falling. Not only the females though, a lot of the dudes with big heads or big hair too, .

Unfortunately, as an OOB displayer, I do have to say I have a lot of non bobblehead pops that have leaned and fallen over, even after warming the legs and setting them straight again. Even without the spring some of them just naturally lean a bit, just enough for the center of gravity to go forward or back and over they go after a day or two of fixing. Nature of the beast if you want to display OOB, but sadly some of my displays have various characters laying down.

I know of some OOB displayers that use a bit of modeling clay on the bottom of the feet, but that really depends on if you are displaying on top of the box like some people do.

I've used quake putty and other means to keep the pops in place, unfortunately that doesn't do anything to stop them from leaning over.

Are there aftermarket stands, ala Marvel Legends figures, to help out w/this, when displaying OOB?

[Cchavez77]

Yess!!!!! Need this!!

Mebbe Funko'll pay attention to here and do it

You never know!

Fingers crossed!

[zonkttc]

Fingers crossed and prayers to the funko gods

[biedermann15]

These are super clean. I need them all.

[MajinCabbage]

I can't wait for the two pack! My guess is it should drop sometime next week.

[CAHLEB]

A variant of one of the common has already been revealed . This is why I hate buying commons so early on.

[Funkorot]

Which one is your favorite?

[PhoenixForce]

Got them! Got the Funko Shop exclusive too. I'm excited for the Wolverine and Sabretooth two-pack. I wonder what else we will see. Bone Claws hopefully!!

[jibcollect]

These are so awesome. I can't wait to have them all!

[ImranC23]

These were such a love letter to the comics!

[Jezter]

Waiting impatiently for the Wolverine and Sabretooth 2 pack to become available, I wonder what is taking so long!!

I have all the other 50th pops, but I'm holding out getting the D&W pops in hopes that the 2 pack becomes available and I can get them all at once.

Wouldn't mind the Wolverine Groot becoming available at the same time, same me some shipping costs. Come onnnnnnn.

[Greek187]

I wonder if we will get Sdcc versions of for the new movie

[KevinFromFinance]

I wonder if we will get Sdcc versions of for the new movie

That would be awesome, also want the female wolverine

[Cheesemango]

A pop of the wolverine lying down with the photograph meme would be so cool to see

I would insta-buy this pop!

[Jezter]

Reaaalllllly hoping the Wolverine and Sabretooth 2 pack becomes available asap, along with Grootverine.

I want to get the DP and Wolvie pops for the movie, but holding off in hopes of the 2 pack and the Groot versions become available so I can save on shipping. I know I'm a broken record about the 2 pack, but since we are never in the know on the hold up...I'm just waiting....and waiting...

[Serlent]

Knowing how hard funko goes on Deadpool pops I'm expecting tons of Deadpool & Wolverine pops. I'm here for it

[zonkttc]

Knowing how hard funko goes on Deadpool pops I'm expecting tons of Deadpool & Wolverine pops. I'm here for it

Me too. Hoping for some exclusives

[TheerealJT]

Knowing how hard funko goes on Deadpool pops I'm expecting tons of Deadpool & Wolverine pops. I'm here for it

I’m surprised none have been announced yet. Guess it’s too early

[Alanamaslama]

Knowing how hard funko goes on Deadpool pops I'm expecting tons of Deadpool & Wolverine pops. I'm here for it

I’m surprised none have been announced yet. Guess it’s too early

Yeah I’m kind of suprised. I almost bought the new ones, but I expect Funko to go hard on the movie line so I decided to see what else they’ll do first