Shipping pops

[luna0100]

When I ship a single Funko, I always include a protector then I bubble it. It fits perfectly into an 8 x 6 x 4 box. never had any issues. I use a 9 x 7 x 5 box if a hard stack is included in shipping.

[Jalvarez]

IMO Sorter and bubble or paper to fit gaps. Only bubble sometimes can damage the items, it happens with the air bags, I don´t know why but sometimes the bags arrive super inflated (Due to change in pression I guess) that this cause damage in the items.

[BikerGeek]

When I ship I normally use a hard case protector, bubble wrap it, and then use a USPS medium box...fits perfect.

[movieman1981]

IMO Sorter and bubble or paper to fit gaps. Only bubble sometimes can damage the items, it happens with the air bags, I don´t know why but sometimes the bags arrive super inflated (Due to change in pression I guess) that this cause damage in the items.

Bubble wrap definitely causes damages the way people over tape. I always ship in a soft protector minimum and bubble wrap with enough tape to secure it not mummy wrap like many Mercari sellers do

[Rick_Morty46]

It would be great if they came packed like the diecast ones, those are perfect , foam on the inside and outside ,hard stack ,strong card board box and a regular box. That pop will make it through a tornado without being scratched.

[zonkttc]

I agree custom pops with a custom protecter box

[Misapops]

I love shipping the pops I sell in protectors, then in a sorter, and then a small wrap of bubble wrap . I think it ensures the ultimate protection!

[stucho2090]

I love shipping the pops I sell in protectors, then in a sorter, and then a small wrap of bubble wrap . I think it ensures the ultimate protection!

I ship with love, care and a prayer. I don't know how many times I have gotten a box that looks like it went a couple rounds with a boxer and it was a MIRACLE it came in one piece.

[BikerGeek]

I love shipping the pops I sell in protectors, then in a sorter, and then a small wrap of bubble wrap . I think it ensures the ultimate protection!

I ship with love, care and a prayer. I don't know how many times I have gotten a box that looks like it went a couple rounds with a boxer and it was a MIRACLE it came in one piece.

I tried this once...then in addition to love and care I added the hard case and bubble wrap

[Nobody888]

I'd prefer my shipped pop to be in a protector and bubble wrapped in a 8x8x8 box

[Lakerfan75]

I have been using an 8x6x6 box with bubble wrap and protectors. So far that has done pretty well in shipping. Purchased a set of boxes on Amazon.

[Richard822]

I usually wrap my Funko pop with bubble wrap inserted into a protector before hand, then tape it up and out more bubble wrap around the sides that are empty and that never caused me any problems

[Tootall411]

If it’s a single funko protector and triple layered corrugated box. Anything over 1 gets a protector bubble wrap and paper in the box. I have more issues with damaged packages on larger boxes than on the smaller boxes. Only bad report on a small box was the post office ran it over but didn’t flatten the pop only smashed a corner. But my customer got a full refund and kept the pop.

[BikerGeek]

I grabbed a stack (10ish?) of the USPS Priority Medium Flat-Rate boxes...fit a single pop perfect with room for additional filling, bubble, etc. Easy peasy.

[zonkttc]

Wat fillings would you use?

[BikerGeek]

Wat fillings would you use?

Pop in a hard clear case, bubble wrap it, line the inside of the box w/bubble wrap and then use styrofoam peanuts for extra filling.

[bbauwe01]

Has to be in a soft protector w bubble wrap.

[FuegoGlorious]

Depends of the value but at a bare minimum I want a soft protector. If it is a higher dollar grail I would expect it to be in a hard stack or Armor/VV. Too risky to ship otherwise. Also regardless of its protector it should be wrapped with something - bubble or paper wadding. Same courtesy I extend on all sales.

[jibcollect]

Depends of the value but at a bare minimum I want a soft protector. If it is a higher dollar grail I would expect it to be in a hard stack or Armor/VV. Too risky to ship otherwise. Also regardless of its protector it should be wrapped with something - bubble or paper wadding. Same courtesy I extend on all sales.

Double boxing grails sometimes doesn't hurt either! But this is definitely the way to go packing pops

[NitroNiki]

I use a protector, bubble wrap AND paper confetti. It all fits nice and snug.

[BikerGeek]

I use a protector, bubble wrap AND paper confetti. It all fits nice and snug.

as much as you can fit in w/o being too tight, but still enough to prevent it from sloshing around.

[CAHLEB]

I always use a sorter and wrap that with bubble wrap. Really dislike when people use newspaper, plastic bags, etc

[NitroNiki]

I use a protector, bubble wrap AND paper confetti. It all fits nice and snug.

as much as you can fit in w/o being too tight, but still enough to prevent it from sloshing around.

Yesssss! Snug as a rug!

[Jessedtaylor77]

I’m glad hard stacks are bettter now. Once had a hard stack puncture a Funko box. So sad.