HELP! I have a sticker crisis!

[ThatMarvelGuy]

The sticker from my Ghostbusters four pack is coming off! how can i keep it on there?

[grandpa_stern]

Glue? Spirit gum? Positive thoughts? The list is endless.

[estrus]

Lick it? Hot glue gun? Crazy glue?

[TempestAvery]

I've used a dab from a glue stick before. It keeps it on there but doesn't leave a huge glue mark on the inside (if that sort of thing is important to you). I display in the box, so personally I like to make sure the stickers are all secure and that there aren't obvious glue marks.

[batman0316]

a small piece (cut to size) of double sided tape may do the trick..

[wonderful217]

You could just take it all the way off and give it to me. My Batman does not have that sticker yet

[missauru]

Throw the box away because it is defective.

[ThatMarvelGuy]

You could just take it all the way off and give it to me. My Batman does not have that sticker yet

aw heck no! im not adding to that madness! you do realize that picture is on instagram saying some people just want to see the world burn?

[ThatMarvelGuy]

Throw the box away because it is defective.

you want me to cry dont you? I still regret doing that to my amazing spider-man and beatles boxes...

[estrus]

Throw the box away because it is defective.

you want me to cry dont you? I still regret doing that to my amazing spider-man and beatles boxes...

Why?

[nyel24]

You could just take it all the way off and give it to me. My Batman does not have that sticker yet

How do you take off the stickers from the other boxes. I tried taking off a Barnes and noble exclusive and it was not coming off at all.

[kings5504]

You could just take it all the way off and give it to me. My Batman does not have that sticker yet

aw heck no! im not adding to that madness! you do realize that picture is on instagram saying some people just want to see the world burn?

This made me

[wonderful217]

You could just take it all the way off and give it to me. My Batman does not have that sticker yet

How do you take off the stickers from the other boxes. I tried taking off a Barnes and noble exclusive and it was not coming off at all.

Heat them up with a blow dryer for a few seconds and use something sharp like a razor blade and they come right off.

[PopRedneck79]

Did you try and use the force?

[JsinLegacy]

You need an adhesive that dries clear and to plastic. Lowes sells LePage adhesive that should work..

[treswright]

Egads, don't use glue!!! It's too globby. Use spray adhesive! I'm an architect and I've been using it for decades to adhere paper to presentation boards. Spray the back of the sticker and let it tack up (dry), then place it and smooth it out with your fingers. It will look like new. PS- if any of you collect trading cards like the old Odd Rods stickers, if they come off their backing spray adhesive is perfect for rejoining them. You can get spray adhesive at Walmart.

[nyel24]

You could just take it all the way off and give it to me. My Batman does not have that sticker yet

How do you take off the stickers from the other boxes. I tried taking off a Barnes and noble exclusive and it was not coming off at all.

Heat them up with a blow dryer for a few seconds and use something sharp like a razor blade and they come right off.

Thanks. WIll try that.

[Funkopoplover91]

Egads, don't use glue!!! It's too globby. Use spray adhesive! I'm an architect and I've been using it for decades to adhere paper to presentation boards. Spray the back of the sticker and let it tack up (dry), then place it and smooth it out with your fingers. It will look like new. PS- if any of you collect trading cards like the old Odd Rods stickers, if they come off their backing spray adhesive is perfect for rejoining them. You can get spray adhesive at Walmart.

http://www.target.com/p/scotch-super-sp ... A-14792263

Will this work?? Isee some reviews say its not that good for a "small" project What do you guys think? Obviously a sticker is a "Small project"

[treswright]

Egads, don't use glue!!! It's too globby. Use spray adhesive! I'm an architect and I've been using it for decades to adhere paper to presentation boards. Spray the back of the sticker and let it tack up (dry), then place it and smooth it out with your fingers. It will look like new. PS- if any of you collect trading cards like the old Odd Rods stickers, if they come off their backing spray adhesive is perfect for rejoining them. You can get spray adhesive at Walmart.

http://www.target.com/p/scotch-super-sp ... A-14792263

Will this work?? Isee some reviews say its not that good for a "small" project What do you guys think? Obviously a sticker is a "Small project"

Yes it will work! The problem with small things is if you place it on an old piece of newspaper or something the force of the aerosol will blow it across the room. The way I get around that is to hold it down with a toothpick and give it a quick blast of the adhesive.

[Mister Piggy Wiggy]

If a Pop is supposed to have a sticker, I always make sure the sticker is stuck on tight before I buy.

[TriFeckTa]

I find washable gluestick works for me, adhesive spray would be the proper way to do it though.

[meangene]

Lightly apply super glue