Help with broken piece on a pop.

[Mack]

My SDCC Olenna Tyrell pop has a broken wine glass. I’m not sure how to fix it or get a replacement. Can anyone help me out. Sorry if this isn’t the right place to post this. Thanks

[jagpop]

Are you able to post a picture of it?

[popsnorthwest]

Pictures always help, we cant see how its broken....so we can give you advice on how to fix it. Please post a picture.

[Shalee04]

A little Lock Tight Gel glue will fix that right up.

[rexflexall]

A tiny dab of that gel glue will definitely get er' done.

[Mack]

Hope this is the right way to post a picture.

[Mack]

Here’s a link to it https://instagram.com/p/Bl5rk4SlToOHlJx ... JxwosUx40/

[ugagerman]

Just pretend she drank too much and dropped the wine glass;)

[post31]

Here’s a link to it https://instagram.com/p/Bl5rk4SlToOHlJx ... JxwosUx40/

Personally I still haven’t figured out how to post pics on here but yah I agree with others usually glue works when I break pieces.

[Mack]

Since you can’t see the picture, I’ll try to explain, the wine in the glass is in two pieces, both glued in incorrectly, with the larger portion on top not being in the glass completely, but rising from the top. I can’t move either piece.

[Kwik_One]

Since you can’t see the picture, I’ll try to explain, the wine in the glass is in two pieces, both glued in incorrectly, with the larger portion on top not being in the glass completely, but rising from the top. I can’t move either piece.

A pic would def help. A little hard to visualize from the description.

The best way to post pics is to use a pic hosting site (like Flikr or Photobucket) then link in your post to the pic. There is a thread on how to do it somewhere here.

[Mack]

Trying from photobucket this time.

[edmomo]

I suppose you could use a hair dryer to dry to soften the glue and pull out the "wine" with tweezers so you can re-position and re-glue. But the extended heat may have other consequences. Some of our custom makers on here probably have a better solution.

[FearlessPhotog]

Super glue fixes all sorts of issues

[Mack]

Superglue won’t work in this situation, as the problem is that the piece is glued incorrectly.

[Kwik_One]

Superglue won’t work in this situation, as the problem is that the piece is glued incorrectly.

I second reaching out to custom makers here on the boards. You could also try something that would loosen the glue like goo-be-gone or nail polish remover